Difference Between Similar Terms and Objects

Difference Between DVI-I and DVI-D

dvi-adapterDVI-I vs DVI-D

DVI (Digital Visual Interface) is the standard interface that was designed to replace the analog VGA interface that has been around for a considerable length of time. But to make it easier for people to adapt the DVI standard, the designers need to include analog signals so that users can adapt DVI while still using their older equipment. DVI-I (Integrated) is the connector that is capable of transmitting both digital and analog signals while DVI-D (Digital) is a connector that cannot transmit analog signals.

Although a Dual Link DVI connector has more pins, a standard DVI-I connector has the complete pin set to facilitate a digital and an analog connection. This is not the case with DVI-D cables as the four pins that are supposed to carry the analog signals have been removed. The corresponding DVI-D ports also lack the slots to which these four analog pins are supposed to fit into. This means that you cannot fit a DVI-I connector into a DVI-D port as the analog pins would have nowhere to go.

To further prevent the possibility of a DVI-I male plug fitting into a DVI-D port, the designers also modified the long flat pin that can be found on one side of the connector that is supposed to be right in the center of the analog pins. This long flat pin has been reduced in size for DVI-D connectors along with the corresponding slots on the port. This means that you cannot fit a DVI-I male plug into a DVI-D port even if you manage to remove the four analog pins on the male plug. But with a DVI-D male plug, you can easily fit it into a DVI-I port without any hassle. This is beneficial since all ports on graphics adapters are DVI-I and you can use a digital only LCD display using a DVI-D connector without any problem.

Summary:
1. DVI-D is a DVI connector that is meant for digital signals only while DVI-I is a connector that allows both digital and analog signals
2. DVI-I connectors have all the necessary pins for a single link DVI cable while DVI-D connectors lack the four pins that is supposed to carry the analog signal
3. The long and flat pin on the DVI-D connector is slightly smaller than that on the DVI-I connector
4. A DVI-D connector can fit on a DVI-I port but not the other way around

Sharing is caring!


Search DifferenceBetween.net :




Email This Post Email This Post : If you like this article or our site. Please spread the word. Share it with your friends/family.


Leave a Response

Please note: comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Articles on DifferenceBetween.net are general information, and are not intended to substitute for professional advice. The information is "AS IS", "WITH ALL FAULTS". User assumes all risk of use, damage, or injury. You agree that we have no liability for any damages.


See more about : ,
Protected by Copyscape Plagiarism Finder