Difference Between Similar Terms and Objects

Difference Between EEPROM and EPROM

epromEPROM (Erasable Programmable Read Only Memory) was a great invention that allowed hardware programmers to make changes to their code without buying new chips. The technology that preceded EPROM did not allow the data to be changed. That is the reason why it gained popularity pretty quickly among hardware makers and hobbyists. EPROMS allow them to fully deploy their program on the chip then test it, once bugs are found they can erase the EPROM then load a modified version for further testing.

Erasure of data is done by exposing the little window on its top side to ultraviolet light. UV light can even be found in sunlight, that’s why the EPROM window is usually covered to prevent accidental exposure  to light sources. Although EPROM was a great advancement in technology, the erasure method still left some people wanting more. Exposing the window to light for a period of time meant that you would have to remove the chip and it would not be usable until the data is fully erased. There is also no possibility of having the data replaced by the end user.

These problems led to the development of a version of EPROM that is much easier to use. Which is named EEPROM or Electrically Erasable Programmable Memory. The only difference between the two is that you can erase an EEPROM with electricity. Although it might seem to be a very small difference, it resulted in major changes that turned the EEPROM into the new standard.

First and foremost, since the data can be erased with electricity, new programming boards were created that erased the content every time you want to enter new data. This simply meant that you would no longer wait in order to test the changes that you have made. EEPROM also lost the window since it doesn’t need that anymore, eliminating the risk of accidental erasure. EEPROM also allowed manufacturers to release patches if the program in the EEPROM had some faults. This reduced the amount of hardware that is being returned for replacement.

Sometimes, minor improvements can dramatically change the usability and reliability of the device. EEPROM is one of those that were very significant. The use of EPROM is now very rare since most people have switched to the much more convenient characteristics of EEPROM.

Sharing is caring!


Search DifferenceBetween.net :




Email This Post Email This Post : If you like this article or our site. Please spread the word. Share it with your friends/family.


5 Comments

  1. It’s good material !

  2. its great feeling after reading this article.
    and i am quite sure about the basic difference between of that two.
    but my question is that does some more changes it need ?

    see i am using 32pin EPROM into my program.and i have Chip Writer Programme for Loading HEX fileinto the same.
    now if i using EEPROM then which HardWare kit i have to use for Loading my HEX into Same. ?

    I have one EEPROM in my project. it having 16 pins.
    its GALE IC.
    and i also having GALEP for that thing.
    Does i use GALEP ?

  3. Thanks, Helped me a lot and even wiki can’t explain more clearly.

  4. Thanks for this. Good digestible info. Keep it up!!!

Trackbacks

  1. Difference Between EEPROM and FlashROM | Difference Between

Leave a Response

Please note: comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Articles on DifferenceBetween.net are general information, and are not intended to substitute for professional advice. The information is "AS IS", "WITH ALL FAULTS". User assumes all risk of use, damage, or injury. You agree that we have no liability for any damages.


See more about : , , , ,
Protected by Copyscape Plagiarism Finder