Difference Between Similar Terms and Objects

Differences Between a Sensor and a Transducer

Sensor vs Transducer

Some people might use the words “sensor” and “transducer” interchangeably. Although they may mean the same things at times, they can also be very different at others. The main difference between a sensor and a transducer is their use. A transducer is any device that can be used to convert energy from one form to another. A good example of a transducer is an antenna, which can be used to convert electricity to electromagnetic waves and vice versa. A sensor also converts one form of energy to another, mainly to electric signals, which can then be used for processing.

Any device that can be used to convert energy in any direction is considered a transducer. For example, the parts of a microphone and a speaker are basically the same, and they are both transducers. But only the microphone can be considered as a sensor and not the speaker.  This is because a speaker does not create signals that will be useful in controlling electrical or electronic circuits. Only transducers that convert energy into electricity can be considered as sensors.

It is already clear that some transducers qualify as sensors because they are able to create an electric representation of any physical phenomenon. Just about anything can be measured using a sensor, and they are used in a lot of things around us. Air conditioners have a temperature sensor that detects how hot or how cold a room is. Cars have oxygen sensors that detect how much usable oxygen there is and adjusts the amount of fuel, thereby achieving greater fuel efficiency.

Because of how they are used, sensors tend to have increased sensitivity compared to devices that are classified as transducers, depending on what is being measured. The values may be as huge as the sound of launching rockets or as diminutive as the electric signals in our nervous systems. Sensors are made to be very precise in order to minimize errors in the measurement of the signals.

Summary:

  1. A transducer converts energy from one form to another while a sensor detects physical characteristics for signal processing.
  2. A transducer converts energy in two directions while a sensor can only convert it in one.
  3. Some transducers can be used as sensors.
  4. Sensors tend to be more sensitive than transducers.

Sharing is caring!


Search DifferenceBetween.net :




Email This Post Email This Post : If you like this article or our site. Please spread the word. Share it with your friends/family.


1 Comment

Leave a Response

Please note: comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Articles on DifferenceBetween.net are general information, and are not intended to substitute for professional advice. The information is "AS IS", "WITH ALL FAULTS". User assumes all risk of use, damage, or injury. You agree that we have no liability for any damages.


See more about : , , , ,
Protected by Copyscape Plagiarism Finder